CMC ProSeries STAINLESS STEEL RESCUE STRETCHER
The ProSeries Rescue Stretcher is a complete re-thinking of the classic Stokes military-style stretchers. The top rail is a full one-inch diameter to make the stretcher easier to handle when carried for extended periods. The "chicken wire" has been replaced with a Durathene netting which eliminates the cuts and scrapes caused by broken wires. The back support is molded High Density Polyethylene for greater durability. The steep sided design allows a narrower stretcher with the same width at the bed which will accept the standard sized back boards. The narrow width and rounded ends provide greater maneuverability in tight locations. Comes with four stretcher straps.

ProSeries Rescue Stretcher Specifications:
Material: Stainless Steel
Width: 23 in. (58cm)
Length: 83 in. (218cm)
Depth: 7.25 in.
Weight: 31 lbs (14kg)
Load Rating: 2,500 lbf (11kN)

StratLoad™ Attachment Points

726100 Rescue Stretcher, Tapered
Price: CALL 800-423-0686

726101 Rescue Stretcher, Rectangular
Price: CALL 800-423-0686

CMC ProSeries STRETCHER HARNESS
This is a fully adjustable spider harness intended for use with a Stokes litter. All hardware meets NFPA and military specifications. A heavy duty O-Ring is used for the top tie-in point. Parachute buckles on each of the four legs allow them to be adjusted independently, which means the stretcher can quickly and easily be set at the best angle for patient comfort. The use of Mil-Spec hardware throughout reduces wear on the web.

Rated strength of the harness: 5,000 lbf (22 kN).
A 10-foot tender line and a nylon storage bag are included.

Color: Black

(Carabiners not included.)

724121 Stretcher Harness, CMC ProSeries
4 lbs, 8 oz (2 kg)
Price: CALL 800-423-0686

ProSeries STRETCHER HARNESS KIT
A complete package to set up your stretcher for a vertical evacuation with a horizontal stretcher. Includes the easily adjustable CMC ProSeries Stretcher Harness, the Patient Tie-In System, and the rigging for the stretcher tender.

Package includes:

• 1 CMC ProSeries Stretcher Harness
• 1 Patient Tie-In System, One-Piece Stretcher
• 1 Patient Tie-In system, Pelvic Harness
• 1 CMC Rescue Stretcher Pack
• 4 CMC PS Aluminum Screw-Lock
• 2 Gibbs Ascender, 1/2 Aluminum
• 1 CMC Rescue Etrier w/ Tie-in, Red
• 1 CMC ProTech Aluminum Locking D Carabiner, Brite

501106 Stretcher Harness Kit, ProSeries Kit
Price: CALL 800-423-0686

CMC ProSeries TI STRETCHER
The saying around the office is that "titanium may be expensive, but it's worth it." Just lift the ultra-lightweight Traverse Titanium Stretcher with one hand, and you'll have to have one. Built to the same specifications and dimensions as the stainless stretchers, the titanium model eliminates 14 pounds. Like the stainless steel models, the titanium models have Durathene netting and molded High Density Polyethylene back support. Comes with four stretcher straps. Available with StratLoad™ Attachment Points.

Weight: 13 lbs (6kg)

726102 Ti Stretcher, Tapered, CMC ProSeries
Price: CALL 800-423-0686

726112 Ti Stretcher, Tapered, w/ StratLoad Attachment Points
Price: CALL 800-423-0686

TRAVERSE BUGABOOK RESCUE STRETCHER
Named after the rugged British Columbia mountain range that it was designed to operate in, the Bugaboo is a highly versatile, lightweight stretcher. The smooth bottom provides a sliding surface over hard snow, ice, or rocks. The secondary rail is positioned close to the bottom of the stretcher which provides a more secure patient tie-in. The flat bottom of the stretcher also adds to the comfort of the patient. The 7/8 in. diameter top tube provides a comfortable grip. The patent-pending StratLoad™ Attachment points allow for a fast, secure clip in for vertical operations. The split-apart locking collets now feature the LocSaf™ Upper Connector that has a visual position indicator and will not back off when scrapped against a wall or rock. Internal width of 18 in. will fit most backboards.

Fiberglass/SS has stainless steel tubing, StratLoad Attachment Points, and lower connectors. The composite shell is made of Light RTM Fiberglass.

726226 Rescue Stretcher, Fiberglass/Stainless Steel, Traverse Bugaboo
86 in. (218cm) 23 in. (58.5cm) 25 lbs (11.3kg)
Price: CALL 800-423-0686

CMC ProTech RESCUE STRETCHER
The CMC ProTech Stretchers are light-duty, disaster response stretchers designed for durability and versatility. The unique feature of the ProTech Stretchers is the tubular runner rails that run the full length of the stretcher along the bottom. These provide a very strong and durable base, making it far more difficult to damage from regular use, as compared to other baskets that simply use a flat bar. This product represents a very cost-effective alternative to the more heavy-duty stainless steel models, and will meet the needs of many users who only use stretchers occasionally, or who are on very limited budgets for rescue equipment. All models are 7-1/4 in. (18 cm) deep. Durathene netting. Powder coated steel.

Loading Rating: 900 lbf. (4 kN)
Color: Black.

726300 CMC ProTech Rescue Stretcher, Tapered,
83-1/2 in. (211cm) 24-1/4 in. (62cm) 29 lbs (13 kg)
Price: CALL 800-423-0686

726301 CMC ProTech Rescue Stretcher, Rectangular
83-1/2 in. (211cm) 24-1/4 in. (62cm) 29 lbs (13 kg)
Price: CALL 800-423-0686

726305 CMC ProTech Rescue Stretcher, Confined Space
83-1/2 in. (211cm) 18-1/4 in. (48cm) 26 lbs (12 kg)
Price: CALL 800-423-0686

TRAVERSE ADVANTAGE PLASTIC STRETCHER
The Traverse Advantage Plastic Stretcher combines a fully internal stainless steel frame with a high-density polyethylene plastic shell that protects the patient and provides a smooth bottom surface if you need to slide the stretcher. The frame provides a 2,500 lb. strength rating and fully supports the patient. In addition, the shell attaches to the top frame, leaving the second railing for tying in the patient. The shell has generous cutouts for carrying the stretcher and the 7/8-inch diameter top rail is more comfortable on the hands. A closed cell foam patient pad prevents absorption of fluids and is resistant to the harshest of cleaning agents. For high-angle evacuations, the Advantage has the patented StratLoad™ Attachment Points for clipping carabiners inside the frame rails.

Dimensions: 85 x 23.5 x 7.5 in. (216x57x19cm)
Weight: 31 lbs (14kg)
Load rating: 2,500 lbf. (11kN)

726125 Traverse Advantage Plastic Stretcher
Price: CALL 800-423-0686

TRAVERSE RESCUE STRETCHER
The Traverse Rescue Stretcher (TRS) was designed as a lightweight compact stretcher for vertical and horizontal evacuations, ideal for wherever space is a limitation such as confined space, backcountry, and helicopter rescues. A high-density polyurethane sheet provides rigidity and patient protection. The bottom fabric is a specially woven 1350 denier, coated Cordura nylon for resistance to abrasion and cuts. The top layer is 1000 denier Cordura nylon. The carry handles have plastic tubing for comfort and are designed as structural attachment points for the lifting bridle. The built-in full-body harness is color coded for rapid patient packaging. The shoulder and groin straps add to the patient's comfort and foot straps help support the patient during vertical lifts. Six exterior 2-inch web restraint straps further secure the patient. The included storage bag has backpack shoulder straps.

• Built-In Patient Restraint System - for fast and secure packaging
• Designed for Vertical or Horizontal Use
• Storage/Backpack Bag - for easy transport and storage

Dimensions: 80 x 33 in. (202x83.8cm)
Stored dimensions: 34 x 10 in. dia. (87x26cm)
Weight: 18 lbs (8kg)
Load rating: 900 lbf (4kN)

CMC Stretcher Harnesses sold separately.

726600 Traverse Rescue Stretcher, Traverse
Price: CALL 800-423-0686

STRETCHER FLOTATION COLLAR
A 10 foot long "life ring" that folds around Traverse and CMC Rescue brand stretchers. The kit attaches with side release buckles providing flexibility for a variety of stretcher shapes and configurations.

Color: Orange
Weight: 3 lbs, 8 oz (1.6 kg)

726110 Stretcher Flotation Collar
Price: CALL 800-423-0686

CASCADE ADVANCE ONE PIECE LITTER
This is the ultimate small team response litter. The two-piece unit can be carried and easily assembled by one person, is extremely lightweight, durable and highly versatile. Crafted of hand laminated composites, its shape, steel handrails and ample brackets provide maximum victim protection and comfort as well as optimum maneuverability for the litter attendant. This litter can be used without a backboard. Patient straps securely immobilize patient to the bed of the litter. Easily assembled or disassembled in the field within seconds utilizing the Cascade Toboggan Fastlock system. Excellent vertical raise handling characteristics - equally at home on snow, rock, ice or asphalt. All Advanced Litters come with removable Pad and Aluminum Daisy Chain. Color: International Orange. Options include Trail Handles, Overland Wheel, Snow Package and Vertical Pull Brackets.

PE42128

Price: CALL 800-423-0686

CASCADE PROFESSIONAL STAINLESS ONE PIECE LITTER
Extraordinarily strong and technically advanced, the Cascade Professional litter is constructed with a 3/4” tubular frame and 3/8” supporting cross members, and is powder coated for extreme durability. Each litter includes new Load Lift Attachment Points for either horizontal or vertical lifts. Litters also come complete with the PMI FAST, or QuickTab Patient Straps, an integral backboard (standard taper boards fit too) and a heavy duty high density polyethylene mesh liner.

PE42116

Price: CALL 800-423-0686

CASCADE PROFESSIONAL TITANIUM ONE PIECE LITTER
The Cascade Toboggan Professional Series Rescue Litters offer the best of all worlds. Reasonable pricing with the most advanced features of any rescue stretcher available today. Designed for the demanding professional, these high strength litters are for extreme durability. Each litter includes new Load Lift Attachment Points for either horizontal or vertical lifts. Litters also come complete with the PMI FAST, or QuickTab Patient Straps, an integral backboard (standard taper boards fit too) and a heavy duty high density polyethylene mesh liner.

PE42118

Price: CALL 800-423-0686

CASCADE LITTER FLOTATION SYSTEM
This Litter Flotation System was designed to fit all Cascade Professional Series Litters and Advance Series Litters with Daisy Chain. It is self-righting and maintains the litter in a head-high horizontal position for ease of loading. Capable of floating the litter, patient, and at least one rescuer. Easily attached and removed for storage, this Floatation System is ideal for ocean, lake and swiftwater rescue. Will also fit most other manufacturers' tube framed litters.

PE42140

Price: CALL 800-423-0686

JUNKIN PLASTIC LITTER
For those highly rugged rescue situations such as industrial, mining, or construction, the Junkin litter is an ideal choice. Key Features: Yellow high-density polyethylene shell - Stainless steel outer rail. Molded runners - Secured non-absorbent foam pad - Four patient restraint straps

Length: 81.5” - Width: 24” - Height: 7.5”

PE42098

Price: CALL 800-423-0686

RUSS ANDERSON UNIVERSAL LITTER WHEEL
Because it clamps to the top rail, the Russ Anderson Universal Litter Wheel will fit a wide variety of litters including the plastic litters and the metal litters that have the flat metal straps for bottom rails. The all-terrain tire provides comfort and stability. Unique locking device "clamps" the frame to the litter.

330700 Universal Litter Wheel
30 lbs (14kg)
Price: CALL 800-423-0686

TRAVERSE RESCUE MULE II LITTER WHEEL
The Mule II Litter Wheel is the only litter with handles that store in a space no much bigger than the wheel itself. The wheel slides off of the axle and stores securely inside the frame. The handles fold over and around the wheel for compact storage that will fit most rescue vehicles. The handles allow fewer tenders and adjust in height for easier carrying. The large ATV-type wheel provides shock absorption for the patient and rolls over uneven ground smoothly.
Drop shipped from factory.

331602 Mule II Litter Wheel, w/ Handles
44 lbs (20kg)
Price: CALL 800-423-0686

331601 Mule II Litter Wheel, w/out Handles
34 lbs (15.4kg)
Price: CALL 800-423-0686

SIMULAIDS RESCUE MANIKINS
The official manikins of the Firefighter Combat Challenge, Simulaid's manikins are the best way to maintain the reality of rescue training without using a live subject. Fully articulated, Rescue Randy can be positioned in every conceivable situation. The head and body are built of dense, flexible, life-like vinyl that is rugged and waterproof. The 4,200 lbf breaking strength stainless-steel cables are coated. Rescue Randy has been designed to be a realistic 6-foot-tall, 165 lb body-size manikin. Jennifer Juvenile is 4 feet tall; equivalent to a 7 or 8-year-old child. The Water Rescue Randy was developed for YMCA water safety courses and allows adjustment to its buoyancy by adding weight to the abdomen. It weighs 40 pounds on dry land but will sink with about 10 pounds added weight. I.A.F.F. Rescue Randy has additional reinforcement for even greater durability.

Note: Only the Water Resuce Manikin should be used in the water.

781338 Rescue Randy
5 ft. 5 in., 65 lbs.
Price: CALL 800-423-0686

781335 Rescue Randy
5 ft. 5 in., 125 lbs.
Price: CALL 800-423-0686

781344 Rescue Randy, Combat Challenge
6 ft. 1 in., 145 lbs.
Price: CALL 800-423-0686

781345 Rescue Randy, Combat Challenge
6 ft. 1 in., 165 lbs.
Price: CALL 800-423-0686

781475 Rescue Randy, IAFF
6 ft. 1 in., 185 lbs.
Price: CALL 800-423-0686

781355 Jennifer Juvenile
4 ft, 0 in., 22 lbs.
Price: CALL 800-423-0686

781326 Water Randy
40 lbs.
Price: CALL 800-423-0686

781373 Nylon Storage Bag for 16, 40, 55, or 105 lbs Manikins
Price: CALL 800-423-0686

782094 Nylon Storage Bag for 145 or 165 lbs Manikins
Price: CALL 800-423-0686

CMC RESCUE LITTER SHIELD PLUS
Protect your patient from further trauma during stretcher evacuations and carryouts. A patient in a stretcher has a very limited ability to protect their face, head, and neck. Since its inception, the CMC Rescue Litter Shield has made several "saves" by deflecting falling rocks and debris, inclement weather, and brush without compromising access to and visibility of the patient's head. New for 2006, the Litter Shield Plus is taller to provide more room for a patient on a backboard or litter insert, and to help reduce the "closed-in" feeling experienced by some patients. The new mounting bracket eliminates the need for a railing clamp on the stretcher and allows the shield to fit most stretchers. Molded of thick Lexan, the Litter Shield offers impact resistance with the clarity and weather-ability of glass. Patient comfort is increased due to the reduced need for other head and face protective equipment. Patented.

Weight: 6 lbs (2.7kg)

740005 Litter Shield Plus, for CMC ProSeries & Traverse Titan Stretchers
Price: CALL 800-423-0686

740001 Litter Shield Plus, for CMC ProTech & Junkin Stretchers
Price: CALL 800-423-0686

FERNO MODEL 445 UNIVERSAL HEAD IMMOBILIZER
The closed-cell foam provides excellent head support and the waterproof plastic coating makes this immobilizer easy to clean. Strap system fits most backboards and the taper on one side of the head blocks allows use on scoop stretchers. Large side holes allow monitoring of patient's ear canal. Base plate can remain on backboard for storage.

Weight: 2 lbs.

726445 Universal Head Immobilizer
Price: CALL 800-423-0686

FERNO MILLENNIA™ BACKBOARD
The compact tapered design of the Millennia backboard provides easy maneuverability and storage and has less deflection for improved patient stabilization. The sealed construction has high resistance to fluids, chemicals, and temperature. Ten X-ray translucent, polycarbonate speed-clip pins allow a variety of strapping configurations. Special mounting slots for the Model 445 Head Immobilizer. Straps not included.

Dimensions: 72 x 16 x 2 in.
Weight: 11 lbs
Rated capacity: 350 lbs

726400 Ferno Millennia Backboard
Price: CALL 800-423-0686

LSP MILLER FULL BODY SPLINT/LITTER
We have used the "Miller Board" for years in our confined space classes and on rescues. Hook and loop straps allow rapid immobilization of a patient, yet is so secure and compact that the patient can easily be tipped and rolled to fit through tight or confined spaces or used if necessary for a vertical lift. Often we will use the Miller Board to extricate the patient, and then tie the board into a litter for the evacuation. Split leg design fits Stokes type litters and allows each leg to be secured separately. X-ray translucent.

721100 LSP Miller Full Body Splint/Litter
66 x 14 in. Yellow 15 lbs
Price: CALL 800-423-0686

721106 Cordura Nylon Case, for the LSP Miller Board
Price: CALL 800-423-0686

PMI FAST PATIENT RESTRAINT
Based on popular wilderness rescue lashing techniques for form and function but can be totally pre-rigged for fast securing of a patient. Improved model features metal-to-metal buckles for patient security and peace of mind. Comes with adjustable foot stirrups, safety back up to patient‘s seat harness and pre-sewn color coded webbing with buckles. Attaches to almost any rigid frame litter with girth hitches. Once the litter is pre-rigged a patient can be secured quickly by one attendant without tying any knots. Litter not included.

PE42059

Price: CALL 800-423-0686